Cars with plastic target panels are easier to repair, thanks to they don't prompt the dings and dents that usual stage metal reason parts end. Plastic panels annex no item filler to occupation with or metal to sand and smooth. When it comes to picture plastic body panels, there are a scarce matters contradistinctive from representation episode metal object panels. Drink in whitewash plastic body panels the exactly form and predispose the first-rate distemper Stop credible on your van.
Place masking tape and paper around the edges of the area you are painting. Wipe the area down once again with wax and grease remover to receive rid of grease from your fingerprints, which can cause bubbling under the paint once it has dried.3.
Sand until the world is smooth and stupid. Wipe the panel down with wax and grease remover to remove any sanding dust and grease from your fingers.
2.
Instructions
1. Sand the plastic panel by fist using 300 grit sandpaper.Spray a thin coat of adhesion promoter over the plastic body panel and let it dry for 30 minutes. This gets into the surface of the plastic and allows the primer and paint to adhere to the plastic surface. Without adhesion promoter, the primer and paint will eventually peel and flake off.
4. Apply a thick coat of primer on the area and allow it to dry for 30 minutes. Sand it lightly with 400 grit sandpaper until it is smooth. Wipe the panel again with wax and grease remover.
5. Paint the area with two thin coats of paint, waiting 30 minutes between each coat. Go over the dried paint with two or three thin coats of clear coat paint, waiting 15 minutes between each coat. Remove the masking tape and paper. Allow the panel to dry for 24 hours before handling.
