When a vehicle fails to begin, the headache can sometimes be traced to the starter. Briefly, the starter is the Slogan that makes the engine turn over. The battery sends now to the starter solenoid, which then sends ongoing to the starter. A defective starter Testament, Sure, require to be replaced. For the 1993 Dodge Dakota, the starter is located dependable below and to the side of the alternator, at the front of the engine.
Instructions
Removal
1. Lift the hood of the vehicle. Using a team of pliers or an adjustable wrench, loosen the bolt that secures the negative cable clamp to the battery. The detrimental cable is melanoid. Disconnect the denial cable from the battery.
2. Allure a diagram of the wires connected to the terminals on the starter Engine solenoid, which is attached to the side of the starter. These wires connect the solenoid (and starter) to the battery and ignition switch. Reconnect the negative cable clamp to the battery post. Fully tighten the bolt on the clamp, ensuring a snug fit.
Simply lift and pull it off.
Installation
4. Position the just out starter into city, aligning the mounting holes on the starter with those on the engine.
5. Thread Everyone of the mounting bolts in put by labourer. Once the bolts are seated, fully tighten them using the socket wrench.
6. Reconnect Everyone of the wires (from the battery and ignition switch) to the terminals on the starter Engine solenoid. Refer to your diagram if necessary.
7. Using the appropriate-sized socket and socket wrench, loosen and seperate Everyone of these wires from the solenoid.3. Loosen and remove Everyone of the starter's mounting bolts enclosing the border of the starter and detach the starter from the engine.
