Locating brake lines on your vehivle is an evident chore in most cases. In the celebration that the automobile has lope over something that may corner damaged the undercarriage of the vehivle, or whether the brake pedal goes to the floor, checking the brake lines is a must.
Instructions
1. Trial the brake lines by putting the machine on a lift so that you can descry them. Provided you don't admit access to a lift, jacking the automobile up and putting jack stands under the automobile Testament suffice.
2. Alpha from the skilled cylinder that is normally located under the hood on the Chauffeur's side, or by checking the lines from Everyone trundle.
3. Proof the crackerjack cylinder for its fluid level. If the fluid is low, you have a leak somewhere. Generally, fluid level doesn't drop unless your brake shoes or pads are especially worn.6. Follow the brake lines on both sides of the car to the wheels. The usual places that leaks develop is at the juncture where the lines attach to the wheel cylinders.
However, if it isn't leaking, that still doesn't mean it is working properly.
5. Travel down the undercarriage of the car and check the line to see if it's leaking. Sometimes running your hand over the lines is necessary because brake fluid is clear and hard to detect.
Make sure to add fluid so that the cylinder is full and replace the cover.4. Look at the master cylinder. If the cylinder is wet in any area, change it. Check the wheel cylinders for leaks. If they're wet, they need to be replaced.
