Hyundai brakes are self-adjusting, meaning that they will adjust themselves as you use the brakes over time. That said, you should still do a hands-on adjustment after they are first installed to make sure that the brake pads stick correctly to the rotor when you apply the brakes. This is also known as "bedding in." What this does is transfer some of the brake pad material to the rotor, making them more sticky. So when you press down on the brakes, the pads will grip the surface of the rotor better than if you hadn't adjusted the brakes.
Instructions
- 1
Turn the key in the ignition to start the car. Put the shifter into reverse.
2Press the accelerator slowly then release the accelerator and step gently on the brakes. At first, the brakes will feel a bit soft and mushy. Keep repeating this process maybe four times or until the brakes feel firm.
3Put the car into drive and accelerate to about 40 miles per hour. Slow the car down by applying the brakes, bringing your speed down to about 10 miles per hour.
4Repeat Step 3 about three times, taking care not to bring the car to a complete halt.
5Stop the car and allow the brakes to rest for about 20 minutes. Your brakes are now fully adjusted.
