Convert a Starter on a Toyota T100 Pickup Motor lorry
Avoid buying starters labelled as rebuilt, on account of the internal parts are not all inexperienced cherish they are in the remanufactured starter.
Instructions
1.The hardest factor approximately replacing the starter on the Toyota T100 pickup Motor lorry is that you accept to crawl under the vehicle. An inexperienced mechanic can achieve the chore in approximately an date and a half. When buying a replacement starter, pick one that is Trade-mark fashionable or remanufactured.Disconnect the cynical battery cable by loosening the fan on the terminal with a wrench. Elevate the vehicle up on the Chauffeur's side using the motorcar jack. City a jack stand under the Motor lorry near the jacking aim. Stand the jack stand up to the frame of the vehicle.
2. Crawl under the Motor lorry. Tag the wires on the starter and solenoid using the marker and masking tape to communication the Correct location of each wire. Disconnect the wires by using a wrench to remove the nuts and then pulling them away from the starter. Unplug the wiring harness from the starter.
3. Remove the bolts mounting the starter to the bell housing using a socket and ratchet. Pull the starter away from the engine.
4. Put the new starter in place and tighten the bolts with the socket and ratchet. Reconnect the wires and tighten the nuts with a wrench. Plug the wiring harness back into the starter. Remove the jack stand from under the truck and lower the truck back to the ground.
5. Connect the battery terminal to the battery and tighten the nut with a wrench.
