A seat band Testament care for you protected in your automobile from a sudden power.
In aligning to repair a seat region, you must headmost apply the Correct procedure to remove the seat belt meeting. According to the I-Car website, when you repair your motorcar seat belt, conclude not jab to repair the seat region retractors. Retractors that are deficient Testament require to be replaced with fresh ones. All you desideratum are the true tools to remove and reinstall your seat girth to extreme protected while driving. Pull the shoulder belt off. If necessary, use a drill with the same socket to remove the bolt completely.3.
You may must to remove your seats and trim panels from your vehicle to cut access to your seat belt assembly. Your car repair manual will, also, be helpful to you in removing your seats and trim panels.
2. Loosen the bolts that fasten the seatbelt assembly to the vehicle. To do this, remove the shoulder sash cover with your hands to reveal the upper adjuster bolt. Use a socket and ratchet to unscrew the bolt. Interpret over your owner's notebook for and details approximately your vehicle's parts and components as they may be contradistinctive from other vehicles.
Instructions
1. Remove the seats and the trim panels.Loosen and remove the lower lap belt mounting bolt with a socket and ratchet. If you have a seat belt cover that is hiding the bolt, pull it back to reveal the bolt.
4. Remove the complete seat belt assembly. Locate your seat belt retractor to unscrew the retractor cover mounting screws with a pocket screwdriver, and then pull off the cover. Unscrew the retaining bolt that fastens the retractor to its mounting point using your socket and ratchet tool. Pull out the seat belt and retractor assembly. Install the new seat belt and seat belt retractor. Reassemble all of the parts.
