You might demand to alternate the exhaust tube below the exhaust manifold on the 2000 Dodge Neon provided the channel rusts finished, causing an exhaust leak. The cylinder runs down to the catalytic converter and muffler. Whether the conduit is leaking exhaust, it makes an annoying buzzing sound, and, left alone, could consideration internal engine damage. The drainpipe has studs in it that fit into the exhaust manifold.
Instructions
2. Up thrust the vehicle, using the floor jack. Bed it with jack stands. Loosen the exhaust brackets under the vehicle, using the applicable sockets.
1. Remove the wiring harness heat shield-to-exhaust assist bracket bolt, using the felicitous socket. Remove the wiring harness shield from the exhaust manifold, using the correct socket. Accomplish not completely remove them.
3. Remove the Cosmetics air hose and the hurry ascendancy vacuum reservoir, using the appropriate sockets, if they are in the way of the manifold to pipe bolts (on some engines, they might not be in the way). Unplug the oxygen sensor wiring harness connector.
4. Remove the nuts on the exhaust manifold-to-pipe flange, using the appropriate socket. Push the pipe off the exhaust manifold far enough so that the studs slide out of the manifold.
.jpg)
.jpg)
