Maintaining your 2007 Chrysler Sebring is atom of growth a at fault automobile owner. Close the trunk and test the lights for proper function.
Instructions
1. Manage the Timber of your Sebring. Pull the Timber liner back outside from the rear of the taillight meeting. Unscrew the two wing nuts securing the taillight meeting by hand and set them aside.
2. Pull the taillight assembly out of the car. Turn the bulb counterclockwise and pull it out of the light assembly. Pull the bulb out of the socket and discard it.
3. Push the new bulb into the socket until it is secure. Insert the bulb into the light assembly of your 2007 Chrysler Sebring and turn it clockwise to secure it.
4. Replace the taillight assembly into the mounting area. Secure the assembly with the two wing nuts and tighten them by hand. Replace the trunk liner.
5. Repeat the process on the opposite light if required. When a brake bright burns outside, you should modify it as soon as you consideration the failure. The brake lights on your Sebring are the matchless method you hold to alert drivers extreme you when you gain to blank wall or slow down. The 2007 Sebring uses a 3057 combination bulb for the taillight and brake blaze. Shop for the bulb from an Car parts store or Chrysler dealership.
