Harley-Davidson motorcycles come in all shapes and sizes, on the contrary they always come with an additional helping of style. From hide upholstery to chrome exhausts, you can add aftermarket options to your Harley to consign it an additional touch of personal style. Python manufactures a slip-on exhaust step designed to fit the widest scale of Harleys. With the genuine tools and means, you can remove your Harley's inventory exhaust and fit it with an aftermarket Python exhaust.
Instructions
Stock Exhaust Removal
1. Loosen the clamps securing the heat shield to the front and rear exhaust pipes, using a socket Chauffeur.
2. Fix the two headpipe mounting nuts at the cylinder intellect and loosen them with a socket Chauffeur.
3. Loosen and remove the clamp bolt that secures the rear headpipe to the sash ride contain.
4. Loosen the clamp bolt and remove the four bolts securing the mufflers to the mounting bar, using a socket Chauffeur.
5. Slide the mufflers off the ends of the headpipes. Remove the clamps from Everyone muffler and place them aside for reuse.
6. Scrutinize the gaskets from the crossover ports where the mufflers attach to the vehicle. Convert the gaskets provided needed.
Python Exhaust Installation
7. Attach the Python slip-on exhausts to the mounting brackets, using a socket driver to secure the Python equipment's flange headbolts. Cook not tighten.
8.10. Embrace the implements's four HEX headbolts completed the muffler brackets and into the Harley's mounting bar. Tighten the headbolts with a socket Chauffeur.11.
Attach the exhaust clamps from the inventory mufflers to the heads of the Python slip-on exhausts.9. Slide the Python slip-on exhausts onto the Harley's headpipes and press them into area so the crossover Harbour aligns with the gasket on the crossover bar.
Tighten the two flange nuts at the cylinder mind with a socket Chauffeur.
12. Embrace the clamp bolt finished the rear headpipe and into the sash handle contain. Tighten the clamp bolt with a socket Chauffeur.
13. Test the muffler and bracket to accomplish confident they are consistent. Tighten the muffler and bracket mounting bolts with a socket driver.
14. Tighten the clamp holding each muffler onto the headpipes, using a socket driver.
15. Check that the heat shields of the headpipes line up evenly with the mufflers. Tighten the hose clamps with a socket driver.
16. Check to make sure that the new exhaust system does not come into contact with any flammable accessories.
17.Clean the exhaust pipes using a chrome-cleaning solvent and a clean, soft cloth.
