Installing a machine battery is a relatively clean elbow grease. Rub the metal clamps that attach to the battery with steel wool or a wire brush to remove any corrosion.7. Place new battery in tray. Place clamp on new battery and attach both cables.
1. Turn off the vehivle's engine before starting the installation case.
2. Lift the hood and allot your battery. There will be one black (negative) and one red (positive) cable attached to the battery.
3. Loosen the nuts connecting the cable to the negative battery post. This cable is bolted to the frame of the car. Remove the negative cable and place away from the battery. Repeat with positive cable. The positive cable is identified by being fully insulated and can be traced to the fuse box.
4. Remove clamp from battery.
5. Lift the battery carefully from your car.
6. Clean the tray where the battery was resting. The matchless requirements is an potency to lift 40 pounds and career able to arrive under the hood of a automobile. Proceed from the outline below to silver your machine's battery yourself, without requiring the advantage of a mechanic.
Instructions
Attach the positive (red) cable first, following with the negative (black) cable.
8. Tighten the nuts. The nuts should not move when moved by your hand.
9. Dispose of battery according to local regulations.
