Use A Battery Inside A Honda Metropolitan Scooter

The retro-styled CHF50 Metropolitan's baby dimensions and economical demeanour are fine suited for short commutes and informal riding, however repeated short rides can filter its battery. This is caused mostly by a shortened recharging amplitude, preventing the battery from restoring the electrical impulse it used to begin the scooter's Engine. Eventually, the battery Testament discharge to the purpose where it Testament no longer grasp a charge. Installing a au courant battery is a intelligible mission that you can cook with a unmarried screwdriver.


Instructions


1. Unlock the seat, using the scooter's ignition guide, and lift it administer to access the under-seat storage compartment.


2. Dehiscent the battery tray, using the pull tabs of the top of the battery tray's lid, located at the rear of the storage compartment.


3. Disconnect the embryonic battery, using a Phillips screwdriver. Unscrew the absent battery cable's bolt, followed by the confident battery cable's bolt. Pull the cables absent from the battery, interest them seperate from Everyone other.


4. Lift the rubber strap off the top of the original battery, then pull the battery out of the battery tray.


5. Press the push tabs into the mounting grommets above the battery tray. Lower the seat until it locks into place.


Screw the cable bolt into place, using a Phillips screwdriver. Secure the negative battery cable, using the same method.


7. Slide the tabs on the bottom of the battery tray lid into the slots on the bottom of the storage compartment. Insert a new battery into the battery tray, aligning its positive and negative terminals with the corresponding battery cables. Pull the rubber strap over the battery and hook it onto the battery tray.6. Place the positive battery cable over the battery's positive terminal.