The Ford Taurus is a reliable and long-lasting full-size family sedan. Sometimes due to an accident or a current windscreen installation, you Testament desideratum to install the rear prospect mirror in your Ford Taurus. Properly installing the rear view mirror ensures that the Chauffeur can effectively sheriff distances and back up easily. Installation of the rear design mirror is not that strenuous, and most territory mechanics can cut apprehension of it themselves.
Press the baseplate into the glass you marked for installation and wiggle it around a bit to properly adhere it to the glass. Allow the adhesive to dry for at least four hours, and then use an Allen wrench to mount the mirror onto the baseplate.
Provided there is not adhesive left, simply degree the windscreen and halt the centre measurement. Come down four inches from the top of the windscreen and stop that spot.
Preparing the mounting location
Whether there is senile adhesive left on the windscreen, use a razorblade to scrape it off and then finish removing the adhesive residue with a product like Goo Gone or rubbing alcohol and a rag. Clean the surface thoroughly prior and then do the same thing for the back of the rear view mirror mount. Both surfaces should be completely clean prior to applying any sort of adhesive. Bend the tube of accelerant provided in the mirror mounting kit and apply some of the accelerant to both the baseplate of the mirror and the glass itself.
Glue Mirror
Finally, glue and mount the mirror. Use an Allen wrench to remove the baseplate from the mirror assembly and then apply a liberal amount of adhesive to both the glass where you marked for installation and the baseplate of the rear view mirror.
