Alter the Headliner of a Ford F-150
Headliner replacement can be costly and a repair shop may amass your Motor lorry for up to a week, depending on how quickly they job. You can convert the headliner yourself and save resources and chronology. Once you hold the materials ready, your Motor lorry can own a fresh headliner installed in less than an date. Be trained transform the headliner of a Ford F-150 so you can build your own repairs and bend rid of the fossil or sagging headliner.
Instructions
1. Remove the elderly headliner from the Ford F-150 by removing the visible Phillips screws from the plastic trim pieces encompassing the edges of the headliner. Remove the Phillips screws holding the sun visors on. There is one screw on Everyone side of the sun visor. On older models, the headliner board can at once be pulled down. On newer models, benefit a Apartment lodgings screwdriver to remove the plastic condition surrounding the overhead lights. Contain the screwdriver and pop the plastic off. The lights can stay in country.
2. Replace the screws in the trim and on the sun visors. Replace the overhead light if needed. Push it into place and it should pop back in. Make very small holes for the screws in the sun visor area.
3. Place the headliner back inside the truck with the new material facing down. Have a friend hold the headliner up while you attach the trim pieces back along the edges of the headliner. Pull the headliner board outside of the Motor lorry and situate it on the ground or in the back of the Motor lorry for a taller work area. If you are using the old headliner board and adding new headliner material, pull the old material off. Use spray adhesive to attach the new fabric to the board. Use scissors to chop out any holes for the overhead lights.
