Emergency brakes were originally used to block a vehicle during a failure of the general brakes. On the other hand, emergency brakes are promptly used primarily to conserve the vehicle from Stirring while parked whereas the accepted brakes on a Toyota Camry scarcely fail. Emergency brakes most much want to be replaced as a backwash of disuse, which can effect the components to rust and sieze.
Instructions
1. Bias which type of emergency brakes your Toyota Camry Testament demand. Emergency brakes typically work by activating the public braking step on the driving wheels. Remove the substantial brake shoe and detach the anchor spring from its lower limit.3. Remove the hold-down spring from the trailing brake shoe.
The emergency brakes for the Toyota Camry capitalization the drum brakes on the rear wheels.2. Elevate the vehicle to remove the rear wheels and brake drum with a socket wrench. Proceeds the come back spring, hold-down spring and its pin from the salient brake shoe.
Pull the trailing brake shoe out with the adjuster strut, automatic adjuster assembly and springs still attached.
4. Disconnect the parking brake cable with a socket wrench so you can remove the return spring and the adjusting strut. Remove the anchor spring. Unhook the adjusting lever spring from the rear brake shoe and remove the automatic adjuster assembly by releasing the C-clip.
5. Install the new brake shoes by reversing the removal procedure. Make sure the C-clip fits properly and position the brake shoe so the lower end is seated in the anchor plate and the upper end is against the wheel cylinder boot.
