The brake caliper applies compel to cause the friction that stops a vehicle.
Cache in attitude that the closer you district the clamp or vice grips to the caliper deadline of the hose, the less brake bleeding you Testament have to do when you replace the caliper.5. Remove the caliper line hold-down bolt off the rear of the caliper, using a 3/8-inch drive ratchet and socket. The hold-down bolt goes through the line fixture and into the caliper. The CD brakes on the rear of the Hyundai Sonata consist of the rotors, caliper brackets, calipers and body-to-caliper brakes lines.
Instructions
1. Exercise a tire iron to loosen the lug nuts on the rear wheels. Assign turn chocks in front of the front two tires. Lift the rear of the Sonata using a floor jack with 2-ton or more advantageous faculty. Establish jack stands subservient the rear suspension arms, blameless on the bottom of the rotate and tire meeting. Remove the lug nuts completely, then remove the rear wheels.
2. Remove the caliper mounting bolts from the bottom of the caliper, which faces infiltrating toward the trundle husky. Adoption a 3/8-inch handle ratchet and socket to remove the bolts until you can pull them absent of the brake meeting by share.
3. Encompass the gratuity of a pry bar along the top of the rotor, in between the rotor and caliper. Push the haft of the pry bar upward to push the caliper off the rotor. Repeat this prying action until you corner completely removed the caliper from the brake meeting. Place the removed caliper on top of the suspension arm, blameless carry on the brake dust plate.
4. Situate a brake hose clamp or needle-nose vice grips onto the rubber rear brake string, between the caliper and the frame of the Sonata.Hyundai anterior introduced the Sonata in 1989. The 2004 Sonata came with a Election of a 2.4-liter, in-line four-cylinder or 2.7-liter, dual overhead cam V-6 engine. Some of the safety and handling features on the 2004 Sonata were independent front suspension, a multi-link independent rear suspension, anti-lock brakes and four-wheel CD brakes.
Removing the bolt will allow the brake line to come free of the back of the caliper. Remove the caliper completely from the vehicle and set it into a drain pan, as a certain amount of brake fluid will want to escape the now-opened caliper.
6. Repeat steps 2 through 5 to remove the rear caliper on the second side of the Sonata. Remember to place the removed caliper in a drain pan so you don't pollute the environment with brake fluid.
