Replace One Of The Wheels Hub On The 2004 Chevrolet Impala

The trundle hub in your 2004 Chevy Impala is used to condo the turn bearings that turn the wheels when the vehicle is in flow. When carrying gone any business on your wheels, you should test your shove hubs to peep whether they hurting for replacing. You can classification a replacement spin hub for your Impala from your limited Car parts store. Replacing the trundle hub is a task that can be completed in approximately an day.


Instructions


1. Berth the vehivle jack underneath your Impala. Uplift the vehicle up off the ground. Levy a jack stand underneath the frame of the vehicle.


2. Remove the lug bolts from the spin using a lug wrench. Lay on a span of protective gloves. Turn the trundle and pull it gone from the axle.


3. Employ a socket wrench to remove the bolts attached to the brake caliper. Lift the caliper out of its bracket and place to one side. Remove the raining nut from the back of the rotor and slide the rotor away from the spindle.


4. Remove the bolts attached to the knuckle of the wheel hub. Use a wooden mallet to carefully tap the wheel hub out of place. Lift the hub from the Impala.


Place the brake caliper back in the bracket and reattach the mounting bolts.6. Lift the wheel back on the axle and reattach the lug bolts using the lug wrench. Remove the jack stand and lower the Impala off the jack.5. Place the new wheel hub into the wheel assembly and fix in place by attaching the bolts on the knuckle of the hub. Slide the rotor back on the spindle and reattach the retaining nut.