Removing the horn pad from your Dodge Ram 1500 office Motor lorry is a profession that you can all in approximately an date. The horn pad meeting further includes the Chauffeur's side airbag, so caution must be taken to diasble the airbag before attempting to remove the horn pad. The Dodge Ram Chauffeur's airbag is charged from the battery by two electrical connectors on the back of the horn pad, so you'll disconnect the battery headmost. Save yourself some chronology and income by removing the horn pad on your own.
3. Disconnect the three Torx screws of the steering wrinkle shroud underneath the steering border with a Torx screwdriver, and set the shroud off to the side.4.
2. Unfasten the two screws on the lower sprint panel below the steering rotate with a Phillip's attitude screwdriver. Remove the sprint panel from the sprint board, and establish it absent of the method.
Instructions
1. Unfasten the abrogating battery cable of your Dodge Ram 1500 effort Motor lorry from the battery advise with an open-end wrench. Authorization the battery cable off for approximately thirty minutes before attempting to remove the horn pad to verify that the airbag is fully discharged.Detach the three metal clips on the back of the steering wheel with a flat head screwdriver, and lift the horn pad assembly off the steering wheel just enough to locate the electrical conectors in the back of the pad.
5. Press in on the two yellow plastic electrical connectors behind the horn pad assembly, and detach the connectors from the back of the pad. Remove the horn pad assembly from the 1500 work truck.
