Remove Dried apricot Latex Whitewash From a Wall
For Dried Latex Paint on a Metal Wall
1. Operate paint thinner to the wall with a paint brush.Removing Dried apricot latex paint on most surfaces is a quite evident locate that can be taken affliction of with minimal eternity and endeavor. Unfortunately, there is no plan to remove latex stain from drywall short of portrayal over it (unless it's a little dye spatter and then a razor blade Testament end the trick). On the other hand, with the honorable Accoutrement and materials, dried latex tint on most surfaces can be a concern of the ended.
Instructions
2. Spray the wall with a pressure washer on a setting of 80 psi. Make frequent stops to check the progress and ensure that the metal isn't being harmed. Wash until all the paint has been removed.
3. Use an SOS pad and nail polish remover with acetone to touch up any missed spots.
For Dried Latex on a Concrete Wall
4. Clean the area with a clean cloth to remove any dirt and debris.
5. Scrape away as much paint as possible with a sharp edge, such as a razor blade.
6. Remove any residual paint by applying nail polish remover with acetone and continuing to scrape until all of the paint is gone.
7. Rinse away excess paint with clean water.
