Remove Bluing From An Exhaust Pipe

Maximal heat on a motorcycle exhaust channel can intention high-temperature bluing.


Motorcycle exhaust pipes can suffer a array of burns, scorching and scratches. Contaminants that come into contact with burning exhaust pipes, such as shoe kid, plastic, denim and other materials, can detract from their appearance and Aroma evil when flaming. Exhaust pipes can be subjected to such great temperatures that they burn, leaving unhappy, nigrous or rainbow discolourations. Realign the pipe mounting brackets and reinsert the mounting bolts into their holes. Tighten all the bolts with the socket and wrench.



Position the motorcycle on its leading kickstand on a calm surface. For elite results, remove the exhaust drainpipe at the attitude connexion with the due socket and wrench. The header exhaust flange fins or securing bracket can impede the Emigration of burned scoring. Remove the exhaust pipe mounting brackets and pull the exhaust cylinder free of charge of the frame.


2. Homogenize a notion of gentle dish washing soap and aqua in a bucket. Avail a stiff-bristled brush to scrub the complete length of the conduit from the header stop to the tailpipe butt end. Complete not forget the muffler. Swab the main dry with a towel then locate it on a workbench. Accomplish not knob the pipe with your bare hands as the oil from your skin will contaminate the surface.


3. Slide the header pipe flange (or bracket clamp) down the pipe and away from the scorch mark location or remove it completely. Open a jar of Blue Job chrome polish and mix the powder ingredients with water according to the directions. The consistency you want will resemble a thick paste.


4. Apply some of the Blue Job paste onto the flat part of a wood block. With circular motions, scrub the block over the scorched area from the end of the blue discoloration to the front of it. Overlap the front end of the pipe. Concentrate on one section of the pipe at a time. Alternate the circular scrubbing strokes with vertical strokes, scrubbing past both ends of the scorched area.


5. Wipe the pipe dry with a clean towel and inspect the surface. If any blue scorch marks remain, apply more paste and continue to scrub. For a smoother and more even polish, apply the Blue Job paste onto a scouring sponge and rub it into the pipe's surface. Wipe the paste residue off the pipe and buff it dry with a towel. The chrome surface should appear shiny with no discoloration.


6. Align the pipe with the header bracket flange. Insert the mounting bolts or screw on the flange. The eminent temperature bluing discolouration commonly originates at the neck of the leading exhaust pipe near the engine imagination where temperatures extent their highest. It takes a fleeting skill and persistent energy to remove blue scorch marks, on the contrary it can be done with a pleasant product and Correct approach.

Instructions

1.