Remove 2002 Ford Focal point Front Pads
The Bull's eye is a immature machine introduced by Ford as a 2000 design in North America. The Bull's eye utilizes a front-disc, rear-drum braking course. Disc brakes slow or location the motorcar when brake pads that are contained in the caliper press against the brake rotor. CD brakes dissipate heat more advantageous than drum brakes and consequently are used on the front --- and sometimes on the rear --- of most cars. The headmost action of replacing worn front-brake pads is to remove them.
Instructions
1. Locate the metal wire clip on the brake caliper that holds the brake pads in place. Make a note of how the clip is oriented so that it can be installed back into the correct position. Pry the clip loose with a flat-blade screwdriver and place it aside.6. Lower the jack. Repeat this action for the other side.
2. Stop removing the lug nuts and remove the two front wheels.
3. Fix the two rubber plugs on the back side of the brake caliper, which is revealed after removing the spin. Pry the plugs elsewhere with a flat-blade screwdriver and locate them aside.
4. Loosen the two caliper retaining bolts revealed after removing the rubber plugs with a 7mm Allen wrench. Clutch the caliper from falling with one participation while sliding the bolts from their mounting holes; habitat the bolts aside. Support the caliper by hanging it with a bungee cord from the plastic wheel-well liner.
5. Loosen the lug nuts on both front wheels with a lug wrench, on the other hand don't remove them at this period. Stand one side of the motorcar until the circle is off the ground with a scissor jack or hydraulic jack placed under the jacking objective at the end the front revolve. Habitat a jack stand under the lower suspension curb arm.
Slide the brake pads out of the caliper.
