Abrade plastic or vinyl with sandpaper before you employ the epoxy coating.
Epoxy is a two-part coating consisting of a resin and a catalyst. Once combined, these two components eventually harden into a durable, glossy Stop capable of withstanding a immense immensity of duress. Provided you animus to employ an epoxy coating, wages designated keeping to surface preparation or you Testament annex problems with adhesion. Moreover, you Testament commitment to manipulate a specific manipulate procedure based on the surface that you are working on.
Instructions
Wood
1. Remove any loose or peeling colouring using a metal putty dagger.
2. Exercise a thin coat of acrylic latex primer using a 3- to 4-inch latex paintbrush. Wash the paintbrush with water.
3. Mix the epoxy resin with the catalyst. Stir the components for five full minutes.
4. Apply the epoxy paint to the surface using the paintbrush.
Plastic and Fiberglass
5. Clean the surface with dish soap. Rinse away all soapy residue to prevent adhesion problems. Allow the surface to dry.
6. Abrade the surface to elevate adhesion by sanding it with a fine-grit sandpaper. Wipe down the surface with a tack cloth.
8. Mix the epoxy resin with the catalyst. Stir the components for five full minutes.
7. Apply a thin coat of acrylic latex primer using a 3- to 4-inch latex paintbrush. Wash the paintbrush with water.
9. Apply the epoxy paint to the surface using the paintbrush.
