Remove An Ignition Type In A Pontiac Grand Prix

Remove an Ignition Material in a Pontiac Grand Prix


The count is normally traced back to a defective gear Proceeds Press-stud or the locking solenoid inside the steering limit.

Instructions

1.Having a stuck ignition clue in your Pontiac Grand Prix can going on many problems. Leaving your ignition principal stuck in your vehicle could pose the risk of having your Grand Prix stolen whether you arrange not allot the issue at the moment. A baby locking solenoid that is controlled by your transmission's gear Proceeds Press-stud can lock your ignition main and the ignition chief cylinder, preventing you from removing the crucial.



Allot the small round cover underneath the right side of the steering column. The small cover underneath the steering column is about the size of a quarter.


2. Remove the small cover underneath the steering column by prying it off with a flat head screwdriver, exposing the access hole to the locking solenoid's manual release mechanism.


3. Place the vehicle's transmission in the park or "P" position.


4. Insert the screwdriver inside the hole until you reach the manual release mechanism for the ignition lock solenoid. (ref#1)


5. Rotate your key to the off position and remove it from the ignition cylinder.