After extent, the brake pads in your Toyota Camry predispose worn down and Testament demand to be replaced. How generally they extremity to be replaced depends on how yet driving you discharge. Once the pads are approximately 80 percent worn, they occasion to be replaced for safety. The pads should be checked regularly with every tire pocket money or rotation. Slide the wheel back on its axle and replace the lug nuts. Do the same procedure to the opposite side to change the brake pads. Jack the car up a bit and remove the jack stands. Then release the jack to bring the Toyota back down to level ground.
Field your Camry on a even surface. Loosen the lug nuts on your front wheels with the lug devotee wrench. End not remove them completely. Situate the jack under the centre of the front extremity under the frame near the radiator. This is the front jack purpose for your Camry.
2. Jack up the automobile Sufficiently so you can slide Everyone of the jack stands last the wheels on both sides. Lower the Camry onto the stands. Remove the lug nuts of one circle and pull it off the axle.
3. Unscrew the bolt holding the caliper in berth with the brake pads. Carefully remove the caliper and fix it down carefully. You can extremely hang the caliper in the circle hardy with a bungee cord whether you choose. Settle on the gloves and mask to avoid exposure to the brake pad dust. Remove the two ancient brake pads.
4. Retract the brake piston with the C-clamp after removing the contemporary pads. This Testament reset the braking action by reason of you are putting advanced pads on. Clip the au courant brake pads in deposit and bolt them in with the caliper. Remove the C-clamp.
5. This is an economical business you can cook safely in your garage or driveway with some universal tools.
Instructions
1. Use the lug nut wrench to fully tighten the lug nuts.6. Loosen the lug nuts on the rear wheels. Place the jack under the frame in the center of the rear end of your Camry. This is the rear jacking point. Jack up the Camry and place the jack stands in front of the rear wheels and lower the car onto them. Remove the lug nuts from one tire and pull it off the axle. Repeat the same process as you did for the front brake pads to change the rear brake pads as well.
