In the 1976 model year, Honda added a second car to its repertoire, the Accord. The Accord gave Honda a presence in the mid-sized automobile field, as the Civic had the compact car realm secured. The 2010 model year marked the year the Accord added an interesting contender to its line-up: the Accord Crosstour, a five-door hatchback. In addition to the Crosstour, the 2010 accord also came in a coupe and sedan. All three different body styles of the Accord had different taillight assembly layouts; however, the only one that required a different process to remove the taillights was the Crosstour.
Instructions
Accord Sedan and Coupe Taillight Replacement
- 1
Open the trunk and locate the fastener(s) securing the carpeting behind the taillight assembly -- two-door Accords have two fasteners and four-door models have only one fastener. Remove the plastic screw in the center of each fastener, using a flat-head screwdriver, to disengage it.
2Pull the carpet downward, exposing the rear of the taillight assembly and the three bulb sockets.
3Grab the taillight socket and twist it counterclockwise to unlock it. Pull the taillight socket and bulb from the taillight assembly.
4Pull the taillight from the taillight socket with a slight wiggling motion. Grab a new 7443 bulb, using a clean, lint-free cloth and press it into the socket. Never touch the bulb with your bare hands, as the oils from your hands may cause premature bulb failure.
5Insert the bulb and socket back into the taillight assembly, and twist it clockwise to lock it into place.
6Pull the carpeting upward, guiding the fastener(s) into the hole(s) in the truck's frame. Tighten the screw(s) into the fastener(s), using a flat-head screwdriver, to lock the carpeting into place.
7Repeat Steps 1 through 6 for the taillight on the other side of the Accord, if needed.
8Close the Accord's trunk.
Accord Crosstour Taillight Replacement
- 9
Open the rear hatch of the Accord Crosstour and locate the two circular screw covers on the inner part of the taillight assembly. Pry these screw covers off, using a flat-head screwdriver.
10Remove the two taillight assembly-retaining screws, using a Phillips screwdriver. Pull the taillight assembly from the Accord.
11Remove and replace the taillight following Steps 3 through 5 of the section titled "Accord Sedan and Coupe Taillight Replacement."
12Set the taillight assembly back onto the rear of the Accord and tighten the two taillight assembly-retaining screws with a Phillips screwdriver.
13Press the screw covers back in place over the taillight assembly retaining screws.
14Repeat Steps 1 through 5 for the taillight on the other side of the Accord Crosstour, if needed.
15Close the Crosstour's rear hatch.