Toyota released the front-wheel-drive Sienna minivan in 1998. The 2000 Sienna is powered by a transverse-mounted 3.0-liter V-6 engine with electronic fuel injection. Toyota equipped the Sienna with speakers in the front doors and rear quarter panels. Some models have optional tweeters mounted in the windshield pillars. The rear speakers are hidden behind plastic covers and can be readily accessed. Replacement speakers are available from aftermarket sources that will offer superior sound over stock units.
Instructions
- 1
Park the Sienna on a level surface and set the parking brake.
2Pry out the speaker cover from the rear quarter panel trim with a flat-head screwdriver. Repeat for the other cover.
3Remove the three screws that hold the speaker to the body with a Phillips screwdriver. Pull out the speaker and disconnect the connector from the rear of the speaker. Repeat for the other speaker.
4Plug the connector to the back of the speaker. Mount the speaker onto the body, install and tighten the screws. Push on the cover. Repeat for the other speaker.
