Frequently asked questions about one din car DVD player

With the development of the technology and society, our life is becoming more and more wonderful. People's pursuit of a better life is increased at the same time, only have a car can't meet their demand, so most people start to install a car DVD player in their cars to serve for entertainment. There may have some faults in the process of using car DVD players, how to solve some common breakdown when using them in our daily life. This article will tell us some frequently asked questions about one din car DVD players and their solutions.
1. How to keep the memory?
Please connect the red power wire with the ignition wire and connect the yellow power wire to constant 12V power supply. The red power wire is to power the unit for normal work, thus it should connect to the ignition wire to get power when the car is started and stop to use power when the car is off. However, the yellow cable is for memory thus it needs a constant power supply, if you connect the yellow wire with ignition wire, when the car is off, all memory won't be kept.
2. How to get rid of the warning message?
There is a BRAKE cable of the item, please connect it to your car's hand brake. In this way, you will only be allowed to watch videos when parking your car. To meet your front passenger's demand for watching videos while you are driving, you can connect the brake cable to your car's negative power. But we strongly suggest drivers not watch videos while driving.
3. How to connect the reversing camera?
You can connect the red and black wires to the reversing light's positive and negative power. And connect the video cable with your item's rear camera input cable. Then when you turn on the reversing light, your item will switch to rear view mode automatically.
4. Why can't I put CD/DVD in?
If you can't put your CD/DVD in, you have to check if there is a protective screw on the top surface of your item first. If yes, you need to remove it before installing the item in your car. If there isn't a protective screw on the top surface of your item, the disk drive may have to be replaced.
5. How to store the radio stations?
You can hold one of the preset stations to store the station you choose manually. And if you have connected the memory wire (yellow) to the constant 12V power supply, the stored stations won't reset when you restart your car DVD.
6. Why the input/output video is in white and blue color?
The problem should be caused by the TV system. Please switch to DVD mode and press the Setup button on your remote control to enter DVD settings. Then you will be able to change the TV system.
If you have met with some problems in the process of using one din DVD player, you can take this article for reference. Of course, this article only includes six common problems. We can discuss with other problems later.