First
When the CD you inserted keep skipping, it is probably that there is dust and other debris around the player lens. In this case, you have to spray a few shots of compressed air into the CD slot on the Dual player to get it clean. In this way, you can fix Dual CD Player problem.
Second
Disconnect the faceplate of the Dual CD player. For some CD Players, which comes with fold-out faceplates, you can have access to them. There is need for you to reset the Dual CD Player by removing the faceplate, when the following occurs. The player is not able to read the connected MP3 Players or discs or the LCD display does not work. Hold down the small button release on the side of the player, then pull the plate to the left side in order to remove it. Leave it off for a few minutes, after which connect it to the aftermarket car stereo.
Third
In case of “Error” message from the CD player, you have to eject the CD and disconnect the front faceplate. Then replace the plate and put in the CD after the reset has finished.
Fourth
The Dual CD Player is no longer powered on. This problem probably lies in the fuse, which is blown. You have to locate the fuse and fuse box. Replace the fuse with a new one. Turn the Dual CD Player on to see if it works again.
We hope that you have understood how to repair Dual CD Player and are able to deal with the problem yourself and have an incredible time during the journey.
You May Also Like
- Car DVD Installation Services for Car Entertainment Systems
- Do it Yourself(DIY) Car Stereo Installation guide free
- how to install a rear view camera
- How to Install Radio DVD GPS Navigation for Toyota Reiz
- How to Install Toyota Crown Radio DVD GPS Navigation