MITSUBISHI ASX GPS Navigation Entertainment System,
Mounting Instructions.
20 steps to guide you How to install car gps system in Mitsubishi Asx
Step 1:Effect before the installation of new headunit
Step 2:Lift the big panel with plastic scraper.
Step 3: Remove the big panel, unplug all the connectors exposed.
Step 4:Remove the cover of the small glove box, unplug all the connectors exposed.
Step 5:Remove the screws used to fix the brackets of the glove box.
Step 6:Remove the glove box.
Step 7:Center console removed.
Step 8:Remove the screws used to fix the side decoration panel (As shown in the picture), take down the decoration panel.
Step 9:Remove the outlets
Step 10:Remove the screws used to fix the switch panel, then slide it down.
Step 11:Part of the accessory removed from the factory headunit
Step 12:Mount the outlets onto the new headunit panel, be careful with the alignment of the latch.
Step 13: Mount the decoration panel onto the new headunit panel, be careful with the location stand, then fix the screws.
Step 14:Mount the switch panel onto the new headunit panel, fix the screws.
Step 15: Plug all the connectors behind.
Step 16:Mount the headunit case back into the vehicle.
Step 17:Fix the screws used to fix the headunit case.
Step 18:Plug all the connectors of the monitor & the headunit case.
Step 19:Mount the new monitor, be careful with the latch behind.
Step 20:Replacement finished and turn it on to test all the functions.
