Lincoln Navigators are available with two types of rear brakes; disc and drum. Disc brakes are gaining popularity due to their efficient stopping power. If your Lincoln Navigator has rear disc brakes, read further to learn how to replace them when needed.
Instructions
- 1
Lift the car off the ground using a car jack. Make sure to evenly support the vehicle on all sides. Keep children and animals away from the vehicle to prevent harm should it collapse.
2Remove the wheels from the Navigator. Use a torque wrench to loosen the lug nuts. Set the wheel on the ground face up to prevent scratching.
3Take the brake caliper off the rear hub by loosening the caliper mounting bolts, but don't disconnect the brake hose.
4Wipe down all areas of the caliper and its support assembly. Use a lint free cloth and brake cleaner, making sure to get in between the areas that touch each other when the caliper slides.
5Replace the brake shoes and anti-rattle clips with the new ones and make sure to line them up with the disc brake caliper support bracket. Hook up the rear disc brake calipers with the rear support bracket. Pump the air out of the brakes.
6Scrub the wheel hub mounting area with the lint free cloth and brake cleaner. Put the Navigator's wheels back on.
7Lower the Navigator until the weight rests slightly on the front tires. Tighten the lug nuts to 83 to 112 ft. lb. using a torque wrench. Lower the vehicle all the way and check the brakes for efficient operation.