In a Kia Spectra, like any vehicle, replacing a brake caliper is a risky task. Replacing brake pads is one thing, but changing a caliper is best recommended for a trained mechanic. Should you look to replace a caliper in your Spectra yourself, make sure it's properly installed and lubricated to prevent sticking. Consult with an expert first.
Instructions
Removing the Old Caliper
- 1
Remove the tire and wheel assembly once the car is securely raised. Use the five-star pattern to remove the lug nuts, removing the nut across from the one previously removed.
2Detach the brake hose from the caliper, toss out the washers on the fitting bolt and plug the hose. Remove the parking brake cable and clip on a rear caliper.
3Extract the guide pin bolts on the front caliper or the lock bolts on the rear caliper. The caliper should now pivot upward from its mount and slide off the pin boot.
4Attach the wheel back on and lower the vehicle. Test the brakes, first by pumping them until they feel firm and then on the road.
Installing the New Caliper
- 5
Install the new caliper onto the rotor or bracket. Tighten the front guide pin bolts to 19 foot pounds to 21 foot pounds and the rear lock bolts to 22 foot pounds to 29 foot pounds.
6Connect the brake hose to the caliper. Use new washers with the bolt. Tighten the bolt to 9 foot pounds to 13 foot pounds on a front caliper and 16 foot pounds to 22 on a rear caliper.
7Reinstall the parking brake cable and clip on a rear caliper.
8Fill the master cylinder to the maximum with clean brake fluid and bleed the brakes. Have someone else apply pressure to the pedal while you loosen the bleed screw on each wheel to let air escape from the system.
