The ignition switch is crucial to your Sunfire's starting development. Alter it fly gone provided it begins to fail.
The ignition switch in your 1999 Pontiac Sunfire is the early item of the ignition channels. The ignition switch is contracted for sending the electric happening that triggers the starter. Provided your ignition switch begins to fail, you may own annoyance getting your Sunfire to begin. It is substantial to convert a failing ignition switch honorable out to prevent complete failure of the ignition manner. You can acquire a fresh ignition switch from an Car parts store or Pontiac dealership.
Instructions
1. Disconnect the contrary battery cable using a wrench. Wait two minutes To admit the air bag process to discharge, provided equipped.
2. Remove the three screws that secure the lower steering column cover with a Phillips screwdriver. Remove the lower steering column cover.4. Disconnect the wiring harness from the ignition switch located at the base of the steering column.
Remove the upper steering column cover. The upper cover will pull out of place, unsnapping from position.3.
Remove the two mounting screws from the switch body using a Phillips screwdriver and remove the ignition switch.
5. Install the new ignition switch and secure it with the retaining screws. Tighten the screws with a Phillips screwdriver. Press the wiring harness connection into position until it clicks.
6. Reposition the lower steering column cover and secure it with the three mounting screws, tightening them with a Phillips screwdriver. Press the upper steering column cover into position until it locks into place.
7. Reconnect the negative battery cable to the terminal and tighten it with a wrench.
