To alter the solenoid, you keep to pull the starter.
Allied most vehicles, the starter solenoid on the Dodge Cart is located on the starter. Unfortunately, with the Dodge Convoy, the starter solenoid is located on the top of the starter where it is practically impossible to exchange without early removing the starter from the engine. Happily, for Troop owners, the starter is elsewhere in the expanded and the bolts that secure it to the engine are child's play to access and remove. This makes removing the starter to benefit access to the starter solenoid a all the more easier chore.
Instructions
1. Coerce the Cart onto a allot of ramps to accretion ground clearance under the vehicle. Accessible the engine hood and disconnect the colorless battery cable from the battery with an adjustable wrench.
2. Establish the starter under the vehicle. It connects to the bell housing and is cylindrical in shape. A ample ebon wire extends from the back and the solenoid, which bolts to the starter, has a wiring harness connected to it.
3. Remove the follower that secures the ample ebon ground wire to the starter and pull the wire off the stud.
Reconnect the wiring harness to the starter solenoid.9. Place the large black ground wire on the wire stud located on the back of the starter and bolt it into place.
6. Remove the two bolts that secure the starter solenoid to the starter. Dwelling the contemporary solenoid on the starter and bolt it into community.
7. City the starter gear back into the telephone housing until the teeth of the starter gear and the flywheel mesh. Turn the starter until the bolt holes on the starter and the ring housing line up together. Bolt the starter into place.
8.4. Press down on the lock tab of the wiring harness and pull the harness off the solenoid.5. Remove the two bolts that secure the starter to the ring housing and pull outward on the starter to seperate the teeth on the starter gear and the teeth on the flywheel.
10. Reconnect the negative battery cable.
