On a Motor lorry, the Bedstead is attached to the frame by a series of bolts without any bushings. Removing these bolts can be a fleeting tricky, matchless in that finding them and then finding a course to remove them is awkward at times. Happily, provided you be versed a meagre tips, this can be imaginary a slender bit easier. In this instance, the project vehicle is a 2006 Chevrolet Silverado 1500 pickup, however the advance is congruent for other vehicles further.
Instructions
2. Connect the 1/2-inch ratchet, extension and socket together and unbolt the first bed bolt by going through an access hole on the bottom of the frame. If there isn't an access hole available, take off the extension and use the socket and ratchet.
1. Crawl underneath the truck and use the flashlight to find the bolts that secure the bed to the frame. A good way to find these is To seek the sheetmetal cross braces that go across the width of the bed floor and Stare at where they connect to the frame. Also look for access holes in the bottom of the frame just below the crossmembers.
3. Loosen the bolt until it comes off of the bed. Then remove the bolt from the frame and repeat the process for any additional bed bolts you need to remove.
