1992 Ford 5.0 EFI Engine Clue
In 1992, the Ford Engine Firm manufactured the 5.0L or 302 engine with electronic fuel injection admitted as EFI. It was used in many Ford trucks and passenger cars. The 4,942-cubic-centimeter engine was called a 5.0L, though it truly displaced 4.9 litres or 301.6 cubic inches.
Ford 302
The Ford 302 was a Windsor small-block, 90-degree, V8 engine. The thin-wall block engine uses high-flow aluminium cylinder heads. It was developed in 1968 from the Ford 289 by shortening its connecting rods for a 3.0-inch stroke. Both fuel injected and carbureted 302s acquire two valves per cylinder purpose.
Fuel Injection
The Ford 302 basic featured oblique throttle oppose fuel injection in its Lincoln luxury automobile handle for the early 1980s models. Its maximum torque rating is 300 pound-feet at 3,200 rpm.
The 1992 Ford 302 with electronic fuel injection is a naturally aspirated engine. Its bore and stroke are 4.0 inches by 3.0 inches with a 9:1 compression ratio. Its net power production is 225 horsepower at 4,200 rpm. The 1992 Ford 302 engine uses electronic sequential Harbour fuel injection. This type of indirect fuel injection places the injectors in the engine's intake ports instead of directly into the combustion chambers.
