Moderate the Alternator on a Ford Expedition
Install the alternator mounting bolts by hand first and then tighten them with the socket set. Connect the charging circuit harness by hand. Bolt the ground strap to the ground stud with the socket set. Anyone with basic auto-repair intelligence can alter the alternator on a Ford Expedition in less than 60 minutes.
Instructions
1. Lift the Expedition's hood manually. Remove the negative battery cable heel from the cynical battery terminal using the battery wrench. Produce undeniable to place the cable neb in a district where it cannot accidentally contact the battery during the repair.
2. See the serpentine band routing diagram for the purpose of the Expedition's automatic cummerbund tensioner. The Expedition's zone routing diagram is on the fan shroud.
3. Movement the automatic girth tensioner off the sash with the serpentine girdle belongings. Pull the zone off the alternator pulley by ability before releasing the vigour on the tensioner with the belongings and allowing the tensioner to slowly action back into position.
4. Remove the Expedition's charging plan harness from the back of the alternator by hand. Remove the ground strap for the alternator's ground stud using the socket set.
5. Remove the mounting bolts that hold the alternator to the alternator bracket using the socket set. Lift the alternator out of the Expedition's engine bay by hand. Set the replacement alternator into the alternator bracket manually.
6.Replacing a Ford Expedition's alternator becomes binding when the internal generator or the outermost voltage regulator malfunctions. The internal generator turns kinetic force into electricity for the Expedition. The superficial regulator controls the electrical output to clinch the Expedition's touchy electrical components don't incur damage from excess voltage. When purchasing your replacement alternator, cook up persuaded it's an exact duplicate of the defective unit.
7. Reinstall the serpentine belt onto the alternator pulley by reversing your removal method. Bolt the negative battery cable back onto the battery using the battery wrench. Close the Expedition's hood.
