Radiator fans come in a array of shapes and sizes.
Electric radiator fan motors are used to aggrandizement air flow fini the radiator when the machine is stationary or Stirring at low speeds. These fans are too used when the air conditioner is running. This is in that increased employment of the air conditioner increases the dimensions of heat the engine produces. Tighten the screws, so the au courant fan is secured to the shroud.4. Lower the shroud and fan unit back down into the engine bay.
Instructions
1. Disconnect the negative battery cable attached to the battery.
2. Unplug the wire socket from the radiator fan. Unscrew, and remove, the four bolts holding the fan and fan shroud in put. The shroud is the goodly plastic quantity the fan is attached to that covers the back side of the radiator. It is used to sincere air complete the radiator.
3. Pull the fan and shroud absent of the engine bay. Remove the bolts holding the fan to the shroud, and remove the debilitated fan. Comprehend the fresh fan into the shroud, and reinstall the screws. This puts an increased load on the engine cooling action. Over future, these fans Testament burn gone and must be replaced. Replacing a fan normally takes no another than two hours.
Reinstall the screws, which connect the shroud to the radiator. Tighten the screws, and beget undeniable the shroud is secure. Plug the fan wiring harness back into fan.
5. Reconnect the negative battery cable to the denying battery post. Start the engine, and turn the air conditioner on. The fan should turn on.
