When your vehivle won't open, there are a infrequent at odds matters To seek. Whether it sounds love the engine is trying to begin, it may be the battery or the alternator. Whether the van makes a clicking sound when you turn the explanation, chances are it's the starter. Whether you've buckle down that the starter is the disagreement, then you can moderate it quite easily. Beginning though, you chalk up to remove the senile replica.
Instructions
1. Disconnect the denial terminal on the battery, then the positive terminal, using the open-end wrench. This is a large piece of plastic designed to protect the underside of the engine from water, and it runs from under the radiator to the mid point of the engine. Pull out the center of the pin, then pull out the entire clip using your hands.3. Locate the starter off of the transmission, and disconnect the electrical connections from the starter using the open-end wrench and the ratchet.
Then use the jack to lift up the front of the Taurus, and set it on the jack stands. Be sure that the sedan is solidly on the stands prior to working on the vehicle.2. Crawl underneath the vehicle and remove the plastic clips securing the front splash shield to the chassis using the flathead screwdriver.
Then, adding the extension to the ratchet, unbolt the starter motor from the engine. Be careful as you lift it away from the engine, as it is fairly heavy.
.jpg)
