The brake calipers press the brake pads against the rotors, creating the friction needed to barricade the vehicle.
The brake pads on a 1997 Ford Expedition are composed of a semi-metallic info which is pressed against a metal rotor to site the vehicle. This alacrity creates a abundant deal of heat and friction, relevant to the brake pad info enervating elsewhere over generation. Once the brake pads distance a decided end of wear, they must be replaced or damage may crop up. Grasp the inner and outer brake pads, by help, and pull them from the brake meeting. Accomplish indication of how the elderly pads come absent, as the fresh one must be placed in the same fashion.11.
1. Loosen, nevertheless accomplish not remove, the lug nuts on the front wheels.
2. Hoist the front of the vehicle with the floor jack and area the jack stands under the vehicle.
3. Remove the front lug nuts and pull the wheels from the Expedition.
4. Settle the c-clamp over the brake caliper, position it so that the constant side is contacting the inner-portion of the brake caliper and the screw piece is contacting the outer brake pad.
5. Tighten the c-clamp until it stops Stirring. This compresses the caliper's internal pistons, creating the interval needed for the fashionable, thicker, brake pads.
6. Stare at the rear of the brake caliper and fix the two caliper bolts, one upper and one lower.
7. Loosen, on the contrary engage in not remove, the upper caliper bolt, using the ratchet and socket. This bolt acts as a swivel mark for the caliper.
8. Loosen and remove the lower caliper bolt, using the ratchet and socket.
9. Swivel the caliper upward and elsewhere from the brake pads. Secure the caliper to a suspension Element, using the bungee strap.
10. The usual amplitude between brake pad changes on a exorbitant SUV, such as the 1997 Expedition, is 20,000 to 30,000 miles, depending on driving habits. Massive hauling or stop-and-go traffic selfish you'll occasion to quarters them enhanced much.
Instructions
Lay the new brake pads on the ground, with the backing facing upward. Cover the backing with a thin coat of anti-rattle grease.
12. Place the new brake pads on the brake assembly, just as the old ones came off.
13. Release the caliper from the bungee strap and pivot the caliper downward, covering the brake pads.
14. Hand-tighten the upper and lower caliper bolts.
15. Tighten the upper and lower caliper bolts to 21 to 26 foot-pounds, using the toque wrench and a socket.
16. Repeat steps 4 through 14 for the brake pads on the other side of the vehicle.
17.Place the wheels back on the Expedition and hand-tighten the lug nuts.
18. Remove the jack stands from beneath the vehicle and lower it to the ground.
19. Tighten the lug nuts to 100 foot-pounds in a crossing patern, using the torque wrench and a socket.
20. Press and release the brake pedal repeatedly until it feels firm.
.jpg)
.jpg)
