Brakes are the most considerable safety characteristic on a machine: Defective brakes can aim accidents, so it is big-league to carry your vehicle's brakes in exceptional working classification. Save lifetime and chips by replacing the brake pads on your Ford. When working on the brakes, see the rotors and surrounding earth for any defects or wear and tear that may further occasion to be addressed. In some cases, the rotors may demand to be refaced so that the brake pads office properly. It is decisive to moderate damaged rotors, as they Testament explanation brake pads to wear gone extra quickly.
Instructions
1. District the vehicle's emergency brake in an "on" position so the automobile Testament not roll while vitality worked on. To conclude this, pull the ability brake located either between the front seats or at the lower left-hand side of the dashboard, depending on the Ford cook, example, and year.
2. Apartment a jack under the side of the vehicle that is being worked on, and jack it up Sufficiently so that some vigour is taken off the tire. Spring from your Ford owner's handbook to fix the true spot to abode the jack, to hoist the vehicle.
3. Loosen the lug bolts on the tire by using a tire iron or air belongings such as an air ratchet. Once all the lugs acquire been loosened, practice the jack to stand the van entirely off the ground.
5. Loosen and remove the top and bottom bolts of the caliper. Grab and pull the caliper out so that the brake pads can be accessed. You don't need to disconnect the brake line from the rear of the caliper.6.
4. Remove the tire and corner it so that half of the tire is under the vehicle, and the other half is sticking outside. Provided the jack fails, the vehivle Testament land on the tire and not injure you or damage the vehicle.
Place a C-clamp so that one side of the clamp is to the rear of the caliper, and the other side is sitting against the caliper piston. Tighten the C-clamp so that the caliper piston slides all the way back into the caliper.
7. Following the manufacturer's directions, insert the new brake pads into the caliper. Rub brake pad grease, which can be found at any auto parts store, behind the pads so that they won't squeal.
8. Slide the caliper and the attached pads over the rotor. Place the bolts back into the caliper holes and tighten them.
9. Place the tire back into position, and tighten the lug nuts so that they fit snugly. Lower the Ford vehicle and tighten the lug nuts so that they are tight and will not come loose.
10. Step on the brake pedal repeatedly prior to starting the vehicle. Doing this will allow the brake calipers to tighten around the rotors so that the brakes will function properly.
