The Plymouth Neon has an electric fuel pump so you should make sure that its fuses and relays are working before inspecting it. You may devoir To cleanse or modify your fuel pump provided your fuel receptacle is not empty on the other hand your engine is all the more having difficulty getting fuel. The Chevy Cobalt's incongruity of styles and trim levels can change the replacement fuel pump you choose.
Instructions
1. End which fuel pump your Plymouth Neon Testament must. This depends not individual on the beget and mannequin, nevertheless again the engine amount and type. Complete the installation by reversing the removal procedure.
Aid the fuel course impulse and filter the fuel receptacle. Disconnect the cynical battery cable.
3. Remove the evaporative emissions (EVAP) border from the EVAP canister and then take out the EVAP canister. Disconnect the fuel line from the fuel pump by squeezing the quick connect retainers. Depress the retainer for the electrical connector to the fuel pump and pull off the electrical connector. Remove the fuel hoses from the fuel tank.
4. Support the fuel tank with a jack and remove the bolts on the fuel tank strap. Release the lock nut on the fuel pump with a ratchet and spanner wrench or tool J39765, depending on the model. Remove the fuel pump and discard the O-ring seal.
5. Install the new fuel pump using the items included in the kit, especially the O-ring seal and ensure the alignment tab sits in the notch on the fuel tank. Tighten the fuel pump lock nut to 41 ft. lbs. with a torque wrench. A Plymouth Neon can annex a 2.0 L 420A or 2.0 L A588 engine.2. Prepare your vehicle for fuel pump supply.
