Sanding is an relevant course in the machine illustration evolution. Own the primer to dry on the baggage of the vehivle you intend to distemper. The bumper of your machine is a good example and starting point, if you have not done any sanding before. Apply the primer according to the instructions on the can and allow it to dry completely.
Without a smooth surface to begin with, the dye and top coat Testament present the imperfections of the motorcar's target. While sanding is not tough, it is conspicuous to be patient and indepth and To possess the honest supplies for the berth.
Instructions
1.2. Gather the items you will need for the sanding process. This should include a bucket of warm water with mild dish soap mixed in and 320 gauge sandpaper. Buy more sandpaper than you think you need, in case you go through it faster or decide to cover a larger area than originally intended.
3. Decide on the way you are going to sand. This could be in horizontal strokes or small circles. It doesn't matter which way you choose, as long as you use the same technique for the entire job.
4. Sand the bumper. Make sure to sand one area until the color is gone, then you can move on to the next section. Start on one side of the bumper and work your way across, completing one area at a time.
