The Chevrolet S-10 has been universal owing to it came absent in the '80s, on the other hand with popularity can come some drawbacks--such as thieves. Reach inside the door and disconnect the linkage that goes to the handle. There are little clips on the linkage that twist off and allow the linkage to fall out of the hole.4. Unbolt the handle from the door using the open-end wrench.
1. Unbolt the door panel from the door using the 1/4-inch ratchet and sockets. There is a bolt under the armrest and on the bottom of the panel.
2. Pull the panel off the door by prying under the panel and pulling. Clips hold the panel in place.
3. It is delightful manifest for someone to gap into the S-10 Motor lorry using a flat-head screwdriver in the door holder. On the other hand whether you require to locate your Motor lorry after a break-in, it Testament receipts a bit of period. In this dispute, the vehicle is a 1999 S-10, on the contrary the step is the alike for other elderliness also.
Instructions
5. Remove the grommet in the top of the door panel using the flat-head screwdriver. This will give you access to the bolt behind it.
6. Unbolt the handle from the door using the 1/4-inch ratchet. Then remove the handle from the door.
7. Install the replacement door handle in the reverse order of disassembly.
