The 2000 Toyota Corolla engine sits transversely or sideways in the engine compartment to accomodate the front shove ride plan of the propel train. The starter Engine on this automobile is in the front and mounted to the lower Chauffeur's side of the engine. While it can be seen looking down from above, it can single be removed from below the machine. Removing the starter from your Corolla is usually done for replacement or testing nevertheless regardless the rationale, the procedure remains the identical.
Lower the under comprehend down and slide it out of the way. Locate the starter on the driver's side of the engine compartment between the radiator and the engine block.4. Locate the electrical connectors on the starter.
Isolate the cable from the battery while you are working on the electrical transaction.
2. Lay a jack under the front of the motorcar and lift it off the ground. Position a fix of jack stands under the frame to flotation the automobile and remove the jack for instanter. Fix the fitting help under cover on the object ethical below the engine.
3. Remove the mounting bolts that secure the under incorporate to the van using a socket and ratchet.
Instructions
1. Direct the hood and allot the opposite battery cable on the detrimental terminal of the battery. Loosen or remove the mounting bolt with a wrench and remove the rejection battery cable from the battery terminal.The first is a plug-in connector, release the locking tab on it and pull it off the starter. The second is a stud and nut. Using a socket and ratchet, remove the nut from the stud and slide the large battery cable off the starter motor. Allow both wiring connectors to hang for now.
5. Locate the upper and lower mounting bolts on the starter where it meets the bell housing. Remove both mounting bolts with a socket and ratchet, starting with the lower bolt first. Carefully remove the starter from the bell housing and lower it out of the engine compartment.
