Starter bolts on a Toyota pickup transmission, too called a "tranny," are the bolts that occupation the starter Engine in city. The starter helps to turn the engine over when you turn the ignition explanation. This, in turn, gets the engine cylinders pumping to compress the fuel while the Glimmer plugs deliver the charged needed to receive the engine running under its own authority. When the starter Engine fails and you hold to alter it, the head anything you obligation to discharge provided figure elsewhere remove the starter bolts, because they're not easily accessible on Toyota pickups.
Instructions
1. Climb underneath the vehicle and set the starter on the back of the transmission. The bolts that hold the starter in community are really on the bottom of the starter, nevertheless they are accessible from the front. You won't be able to arrive them with a principles length socket and socket wrench owing to the starter and transmission are in the approach.
2. Turn the bolt counterclockwise to remove, and pull the socket out with the bolt. If you round these bolts off due to insufficient grip on the bolt head, they will be extremely difficult to remove.
3. Slide the extension and socket past the starter and over the bolt heads (they are visible from the front of the starter).
4. Attach the amplitude to the socket wrench, and then attach the catch sized six-point socket to the socket wrench extension. The exact size of the socket will depend on the year and model of your Toyota truck. Typically, this will be a 9 mm or 10 mm bolt, so you will need a 9 or 10mm socket. Use six-point sockets because they will grip the bolt better.
