Conscious remove the interior door panel from your Ford F-150 pickup Motor lorry is a beneficial skill. Pop off the cover of the window crank handle by prying it off with a panel tool or putty knife.2. Remove the T-20 screw with your Torx wrench. Pull the window crank handle off and set it aside, along with the screw.
1. Establish the window crank handle. The cover of the crank handle pries off, exposing a Torx T-20 screw that holds the handle on. It's fundamental provided you're going to modify the speakers, add competence door lock actuators, or repair a window that's elsewhere of the track, For example. Removing the door panel takes isolated a rare minutes provided you displace a scarce lucid steps.
Instructions
3. Pry off the sail panel at the front edge of the window. Pry it off using your panel tool. Then undo the phillips screw that is exposed. Set the sail panel and screw aside.
4. Look behind the inside door handle. You'll see a plastic cover. Pry this off and loosen the screw behind the cover until the handle comes off. Set the cover and handle aside.
5. Grasp the sides of the door panel on the front and back and lift firmly. The door panel will slide up and release from its clips. When the door panel is loose, lift it away from the door and set it aside.
