Remove CD Brake Rotors on a Toyota Matrix
The brake rotors on a Toyota Matrix are an inordinately considerable attribute of the brake course. Over date, the rotors, which are the round CD that the caliper and brake pads clamp when the brakes are applied, can bias scored, warped or simply wear besides thin from utilize. Rotors should be regularly inspected for wear and replaced whether elementary to certify that your Matrix's brakes service properly and safely. Replacing rotors is a lucid berth that can be done in a uncommon hours.
However, the rotor may be frozen onto the hub from years of dirt and rust. Use a rubber mallet to tap the rotor off.7.
Up thrust the Matrix with a jack and backing it securely with jack stands. Remove the wheels.
2. Disinfected the brake caliper, rotor and nearby areas with brake cleaner and a Disinfected rag. Constitute definite there is no dirt, oil or contaminants on the brake components.
3. Remove the bolts that occupation the caliper to the caliper mounting bracket. There will be two bolts that can be removed with a socket and ratchet or an open-ended wrench.
4. Slide the caliper off of the rotor. Support the caliper with a piece of wire or string so that the weight of it is not on the brake line, which could be damaged from the weight of the caliper.
5. Remove the caliper mounting bracket by removing the two bolts with a ratchet or an open-ended wrench. Set the bracket aside.
6. Pull the rotor straight off of the hub. On the Matrix, the rotors are not bolted on with anything, once the wheel and the caliper are out of the way.
Instructions
1. Loosen the lug nuts that fasten the wheels on.Replacement is the reverse of removal.
