Installing an aftermarket sunroof in the Honda CR-V takes certain tools and a stable help. Placing a late sunroof in the Honda CR-V requires removing or modifying the roof brace. The maximum amount roof for the Honda CR-V is 22 by 38 inches. Installing a great level sunroof in the Honda CR-V minimizes budgeted leaks and wind boom.
Instructions
1. Prepare the functioning environment by laying absent all of the tools and manufacture decided the sunroof has all of the required parts. Remove the seats by unscrewing the four bolts at the design and field a folio or tarp over the interior of the Honda CR-V for Safeguard.
2. Occupation the Screen tray to the roof interior and ice there is at least 4 inches of clearance all the form all over. Push a screwdriver or Brad-awl complete the headrest and Small pit the metal roof at Everyone corner. Remove the headliner, support board and roof brace.
3. Tape the template to the roof using the dimples as a guide and make a hole for the metal shears at one of the corner dimples. Cut out the roof with the metal shears using the template as a guide.
4. Clean off any excess sealant and assemble remainder of the frame and glass. Replace the headliner and support board on the CR-V.
Apply a bead of sealant around the inner lip of the sunroof frame and set it in place. Connect the clamping ring and screws taking care not to over tighten.
6. Smooth the edges with a file and test fit the sunroof frame. Make adjustments if needed and apply a layer of metal primer around the edge to impede rust.5.
