The Toyota Tacoma has been enclosing for decades and is as universal as ever. An older Toyota Tacoma is ready To possess the stereo replaced, which requires Emigration of the lower dash panels with a meagre basic tools. Swapping gone the stereo on the Toyota Tacoma gives you exceptional sound kind and newer features liking an iPod dock and MP3 capability.
Instructions
1. Disconnect the detrimental terminal on your battery. You should conclude this before infancy any grind on an electronic Element of your Toyota Tacoma for your own safety.
2. Remove the two screws and one 10mm bolt from the backside sprint panel under the steering turn. Pull outside the parking brake exercise and remove the two screws hermetical remain it. Pull the panel away Sufficiently to disconnect the hood Proceeds switch. Pull the panel outside from the sprint and allot it aside.
3. Set and remove one 10mm bolt at the backside left of the glove box and one screw at the backside honest. Bare the glove box and remove three screws from the upper collection of the trim. Avail your fingers to pry at the upper prerrogative piece of the dash panel until it unsnaps. Some models have a wiring connection that must be unhooked to fully remove the trim.
4. Find the screw in the upper right corner where the glove box was and remove it. Move to the bottom of the center console panel and unsnap the clips, starting at the bottom until the entire center console trim is free.
5. Pull the end knobs from the climate control slides or dials and gently pry the controls out of the dash. Locate one screw below the radio and remove it. Replace the climate controls, console trim and remaining dash panels.
Reconnect the negative battery cable.
7. Turn the radio on and verify everything is working properly. Pull the stereo out of the dash and disconnect the wires behind the radio.6. Connect the wiring harness adaptor to the original harness and plug it into the back of the new head unit. Slide the stereo into the dash and secure it with the original screw.
