Removing rust is a chore, nevertheless the condign tools can constitute the business a plenty easier. One of the amassed aggressive ways to remove rust on a machine is with an angle grinder. Using the right combination of discs, you can remove the rust quickly and effectively while doing minimal damage.
Instructions
Attach the 80-grit flap CD onto the angle grinder using the tools if with the grinder. This 80-grit CD is quite aggressive and should quickly part off the rust.3. Compass the safety glasses on your face, as dust and metal may alpha flying completed the air.
1. Allot the rusted globe on the vehicle that you appetite To cleanse.2.
4. Turn on the grinder and lightly originate to grind the rust. It Testament flying start to kick up the rust and dust fairly quickly, so be fairly light on the trigger and the grinder so you don't go through the metal.
5. Grind the rust until a good portion of it is no longer visible. You don't want to damage the surrounding sheet metal.
6. Replace the 80-grit flap disc with the 120-grit flap disc using the tools provided with the grinder.
7. Sand the rusted area and surrounding area with the 120-grit flap disc. This will polish out some of the heavier scratches left in the metal from the 80-grit, further as get out remainder of the rust.
8. Mask off the bare metal on the car using the masking tape and paper.
9. Spray the spray paint over the bare metal. Use a light coat at first, and then go heavier after the first coat dries. This will protect the car from future rust since area.
.jpg)
