Install a Cutting edge Bumper on a Jeep Grand Cherokee Laredo
The bumpers on the Jeep Grand Cherokee are specious up of a PVC bumper comprehend or fascia that installs over the frame of the Jeep. The fascia is attached with plastic rivets and a rare screws that are all available from the dealer should you want them. Replacement fascias are available from a Jeep dealer, aftermarket reproduction parts manufacturer or salvation yard. Cop any hardware you commitment before starting the installation so you don't keep to point for parts almost on ice the activity.
Instructions
1. Slide the fascia or bumper cover onto the frame at the front of your Jeep Grand Cherokee. Engage the fascia into the tabs on the lower front fenders.
2. Straighten the holes in the centre of the fascia with the mounting holes in the upper radiator cross member and contain the 2 mounting screws located at the top of the cross member. Embrace 2 exceeding screws in buttoned up the grill and into the mounting tabs on the radiator bed. Tighten all 4 screws using a Phillips belief screwdriver.
3. Install the 2 bolts that attach the fascia to the front fenders, working under the trundle chipper. The bolt holes are located on the back column of the fender near the trundle opening. Install the plastic push pins that hold the fascia to the lower radiator support from the front of the vehicle. Again, these just push into the holes and snap into place.
Tighten the bolts with a socket and ratchet.4. Install the plastic push pins that secure the spin blooming liner to the string of the fascia (they cast liking a plastic rivet); apply pressure to push into the hole.5.
